105
Masterpiece
User Manual
How to save a Config
In the User Config main menu, press the {Save As} button and a new config file table will be
displayed. In the table, select a slot where the file will be saved using the “Destination”
parameter, or just touch the slot in the table, there are 1000 slots to choose from. When
selected the row will be highlighted, then double touch the red oblong in the “Name” attacher
and an on-screen keyboard will be displayed.
Type out a name for the config file and press {Enter}.
Finally, press the {Save} button and the new config file is saved into the table.
Each file can be overwritten, locked so that they cannot be saved to, or deleted from the table.
Note: Remember: Any changes that need to be kept..... Save the Config File
To Next Page
Loading...
