GRASS VALLEY MASTERPIECE User Manual

227
Masterpiece
User Manual
Applying a Dissolve Effect to an existing DMEM
If a dissolve is required on a memory which has not already been set as a dissolve, this can be
achieved by switching on the Dissolve button.
Select an existing DMEM from the file list, then touch the {Dissolve} button. The Effects
Dissolve dialog box will appear, so that the user can set the type of effect required. When
finished, touch the {Apply} button.
Notice that the file now has an “X” next to the DMEM number to signify that it has a dissolve
effect applied.

GRASS VALLEY MASTERPIECE Specifications

General

Brand	GRASS VALLEY
Model	MASTERPIECE
Category	Switch
Language	English