GRASS VALLEY MASTERPIECE User Manual

163
Masterpiece
User Manual
MAV Layout
The MAV Layout menu displays the control surface individual components connected together
to make up the Masterpiece control surface. These are fixed and should not be altered or the
control surfaces may not work correctly.
If an extra MAV Modules such as the MAV-AUX module have been added to the system and the
you need to configure the MAV module to work with the control surface, touch the {Auto
Config} button and the control surface will be configured correctly.
Use the MAV Selector parameter to scroll to the MAV module. Use the ME Group parameter to
set the MAV Module into the correct ME group. Finally touch the “{Apply Changes}” button.
Note: When the system has booted up, if the control surface doesn’t light
up as expected, touch the {Masterpiece Auto Config} button to make sure
that the Masterpiece control surfaces are configured properly.

GRASS VALLEY MASTERPIECE Specifications

General

Brand	GRASS VALLEY
Model	MASTERPIECE
Category	Switch
Language	English