62
How to Save
Snapshots
Detaching Snapshots
Snapshots are attached to the OLED buttons when saved, you can detach a snapshot from an
OLED button, so that a new snapshot can be saved. This is done in the “Panel Config - Button
Info” menu.
To detach a snapshot touch the {Detach Snapshot} button and the button will turn red, then
touch the snapshot button and it will be detached.
Detaching a snapshot does not delete the snapshot from the system memory, the snapshot
can be re-loaded by selecting the snapshot in the table in the “Filing System - Snapshots”
menu, then touching the {Load} button.
To Next Page
Loading...
