154
Engineering, User & Panel Configuration
Preferences
Panel Preferences
Panel Preferences are a set of options that are designed to help the user access or control
functions on the Control Surface more quickly and efficiently.
Preset Bus Double Hit Shift - when turned On, if a Preset Bus button is pressed twice quickly,
the Preview monitor and mnemonic will display the source and name of the “shifted”
crosspoint. The panel will reflect this by either lighting the SHIFT ARROW and the XPT button or
just the SHIFT ARROW. This is determined by the user preference Shifted Crosspoint Lit/Unlit.
Crosspoint Hold Return On/Off - this allows the user to hold down crosspoint button 'A' and
then additionally press button crosspoint button 'B'. Pressing 'B' will select that crosspoint until
'B' is released, at which point the crosspoint selection returns to that for 'A'
Shifted Crosspoint Buttons - This function when set to LIT, will light both the crosspoint
button and the {Shift} button of a shifted source. When set to UNLIT, the actual crosspoint
button for the shifted source will not be lit until the {Shift} button is pressed.
Lockable Crosspoint Shift - this will allow the locking of the shift function to display the
shifted Xpts continuously.
Buttons Show Tally Next - this is used in conjunction with the User Config - GPO Setup and
allows the tally function to show what is being tallied on.
Enable Macros -
Enable Clones -
Keyboard Brightness - this adjusts the brightness of all the buttons on the Masterpiece
control surface.
Legend Brightness - this adjusts the brightness of the mnemonic displays on the Masterpiece
control surface.
Graphic Button Brightness - this adjusts the brightness of the OLED user function buttons.
To Next Page
Loading...
