263
Masterpiece
User Manual
Saving a Macro
Once the macro has been setup, configured and a bitmap has been chosen, the next step is to
“Save” the macro.
Press the {Save…} menu link button to enter the Macro - Save menu, then using the parameter
controls, select a Current File and a Destination within the Macro Save table.
A Name and Description of the macro can also be added by touching the Red attacher button
twice, and entering the required name and description using the on-screen or USB keyboard.
Finally, press {Save} and the macro will be saved to the Hard Disk along with any associated
Bitmap, Store image or Icon image.
If the user then assigns the macro to a button, the bitmap image from the grid is also assigned
to the button.
Note: Up to 1000 macros can be saved in a single File.
To Next Page
Loading...
