37
Masterpiece
User Manual
GUI Menu Layout Overview
Setup, Effects and System Configuration menu selection is done using the buttons down the
left side of the menu. Parameter controllers are on the right side of the menu and consist of on-
screen rotary controls and sliders (these can be attached to the physical rotary controls and
joystick on the control surface). Navigation, Copy & Paste, Undo/Redo, Macro Record and
Modulation Assign buttons are situated at the bottom.
All the menu functions, options and parameters are displayed in the center area of the menu.
1Menu Selection Buttons
2 Selected menu functions and options
3 On-screen Rotary and Slider Controls and Integer Buttons
4 Mainframe Identity - so the operator can see which switcher they are connected to at a
glance on every menu.
5Menu Navigation and Control
To Next Page
Loading...
