197
Masterpiece
User Manual
Keyer Operation
To get to the Keyer menus, touch one of the “Key” buttons {Key 1} (in this example) button in
the top left corner of the menu.The “Mixer, Key 1” menu is displayed as shown below:
Crosspoint - this parameter is used to select the source for the selected Key.
Split Key Xpt - this parameter is used to select the Key source when using “Split Key” mode.
Mix Time - sets the time where a Matte-mix source passes through the Matte color before
reaching the selected signal.
Matte Select - (when “Matte Fill” is selected) selects between Local Matte or Mattes 1 to 16.
Matte - Hue, Luma Sat - (when “Matte Fill” is selected) adjusts the color of the Local Matte
only. The Local Matte color adjustment is displayed as the color bar next to the parameter
controls.
To Next Page
Loading...
