164
Engineering, User & Panel Configuration
Fader Maps
Fader Maps
The Fader Map menu allows you to setup how the two faders work on the Masterpiece control
surface. The menu can also be used to setup any external MAV-FADER modules connected to
the control surface.
Fader Group - this is used to select any external fader module bank groups
Module - selects the button groups for the external fader modules
Fader - this selects the Faders 1 or 2 on the control surface or faders on external Fader Modules.
Button - changes the function of the button at the bottom of the fader.
Channel - this sets the function of the fader i.e. Program, Preset, Voice Over, Main Out etc.
Select the fader using the “Fader” parameter, then as you step through the “Channel”
functions, the functions will change on the OLED button like using the toggle buttons.
Button parameter
changes the function
of this button
Channel parameter
changes the function
of the fader
To Next Page
Loading...
