257
Masterpiece
User Manual
Bitmap
If a macro is going to be assigned to a macro button mnemonic display on the Masterpiece
control surface, on a MAV-UFBPAD module or on a MAV-AUTO module, a bitmap can be
generated that can be associated with the recorded macro and displayed in the mnemonic
display above the macro button or on an OLED button.
In the macro main menu, touch the {Bitmap…} menu link button.
A bitmap can be derived from several places within the Macro Bitmap menu. The first areas are
the Preset Library and the User Library.
The Preset Library has a range of pre-installed icons. Touch the “Preset Library” attacher and
then use the “Preset Library” parameter to scroll through the icons.
As the user scrolls through the icons, when the required one is found, touch the {Grab from
Library} button under the icon. The selected icon will now be displayed in the grid.
To Next Page
Loading...
