275
Masterpiece
User Manual
Loading a Still or Clip into a Store
Touch the Store that the Still or Clip file is going to load into. Then press the {Load} button to
load the image into the selected Store. If the {Store Load on Press} button is selected,
touching a still will automatically load it into the store.
When loading a clip into a Store, the Load button will light up green and stay lit until the clip is
loaded. The process may take a few seconds depending on the size of the clip, especially if the
clip is in a 1080p video format and a few seconds long.
When selecting a clip, press {Load & Play} and the clip will load into the Store and play for the
duration of the clip.
If the original Fill Store is an audio only file, and the user wants to keep the audio content as
part of a new Still or Clip, by pressing the {Keep Audio} button the audio content will remain as
part of the new Fill Store. This could be used for example in a Clip Transition.
This option is the Grass Valleye when an audio file is loaded and the “Keep Video” function is
used.
Load Mode Parameter
New - Allows the user to load new stills and clips into a Store.
Add To Sub-Clip - This will send a still or clip to the Sub-Clip folder of a selected Store, each
time a still or clip is selected by touching the miniclip or pressing {Load} the still or clip will be
sent to selected Store as a sub-clip. In the Append To Sub-Clip mode, if a different still or clip is
loaded into sub-clips, the original still/clip will be over written.
Replace Sub-Clip - This will replace a still/clip in the selected Store Sub-Clip.
Insert Before - If a number of stills/clips have been loaded into the Sub-Clip folder, using the
Store Sub-Clip parameter to move to a defined point within the sub-clip line-up, a still/clip
can be instead before the selected still/clip in the sub-clip line-up.
Insert At End - Allows the user to insert a still/clip at the end of the Sub-Clip lineup, to the
point at where the sub-clip folder is full.
Note: This function will only work when the Load Mode parameter is set to
Replace Sub-Clip (as described below) the Keep Video and Keep Audio
buttons will be grayed out if Load Mode is on any other setting.
Note: Any stills or clips in the selected Store will be over written.
To Next Page
Loading...
