201
Masterpiece
User Manual
Key DVE Operation
The DVE parameters allow the user to position and size a Key Layer, add a Border around a Key
Layer or Crop a Key Layer.
When enabled the DVE can be set to manipulate a Single or Dual Tile (which will be explained
later in this section).
You can choose which source they wish to manipulate using the “Crosspoint” parameter. Touch
the Popup button to select Xpt, Matte or Stores.
To use the DVE functions with key layers, you will first have to allocate Keys to the DVE
channels. Touch the {DVE Allocation...} button, which is towards the bottom of the menu. The
“Keyer DVE Allocation” menu will open.
In this menu, you can select which Key has DVE functionality applied. As the example in the
menu shows, DVE-1 has Key 1 selected. Touch {Close} and the DVE parameters are displayed.
You can now start to use the DVE functions on Key layers.
To Next Page
Loading...
