161
Masterpiece
User Manual
Button Functions
These buttons are used to locate and disable Clones or Macros associated to a button.
Live Mode - will turn Live Mode On or Off
Stop All Macros - will stop all macros running
Locate Button - this will allow the current function of any button to be summarized in the
table. Buttons with Clones and/or Macros attached will light Green when the Locate Button is
Active. To locate a button Press the “Locate Button”, it will go Red and the panel will only light
up Normal Button (e.g. Clones, Macros attachments and Button that have had their Normal
Functionality Disabled), the Table will then Display the current Information about that button.
The Locate button will then return to Gray.
Detach Snapshot - this will detach a Snapshot from the selected button
Locate Macro - works in the Grass Valleye way as Locate Clone, and locates a Macro function
button
Detach Macro - detaches a macro function from a button
Locate Clone - locates the clone button by turning off all the lamps on all the buttons on the
control panel and GUI except the clone button which will turn Red.
Detach Clone - detaches the clone function from a button.
When a button is selected, this menu can be used to enable/disable functions listed below.
Active Functions
Clone - switches the clone function On/Off
Normal - switches the normal function of a button On/Off.
These can be selected together so that both functions are active.
Lamp From:
Clone - will set the button lamp to light up the Grass Valleye as the cloned function, i.e. if live to
air the button will turn Red.
To Next Page
Loading...
Need help?
General
