GRASS VALLEY MASTERPIECE User Manual

106
Engineering, User & Panel Configuration
Engineering Configuration
Engineering Configuration
To get to the {Eng Config} button to open the “Engineering Configuration” menu. In this
menu you can setup the Inputs, Outputs and System Standard which are the main setup.
Input Setup
The Input Setup menu has several main configuration functions integrated into one to allow
the user to quickly configure an input to the mainframe. The user can give a name to the input
source and apply a video standard.
The selected Input is displayed by a light blue bar in the table. The table columns display the
setup state of each input to the mainframe, which includes the input number, BNC number or
name if the input had been named, Router Overwrite and Tile Lines, the Video Standard, Audio
On/Off and timing information.
The BNC Input parameter is used to select an input and will scroll down the table. You can also
touch the “Pop-up Selector” which will show all the available inputs.

GRASS VALLEY MASTERPIECE Specifications

General

Brand	GRASS VALLEY
Model	MASTERPIECE
Category	Switch
Language	English