297
Aux Buses
Aux Bus Overview
In this menu, the exact setup for each individual Output and Aux Bus is setup. The center of the
menu screen Shows a table, which contains each Aux Bus details. The attacher boxes at the
bottom of the screen contain the individual parameters controls.
The Masterpiece mainframe has freely assignable outputs; which means that any output can
be assigned to be either an Mixer Output or Aux Output.
The table in the center of the menu displays the setup of the Aux Buses and the sources that
are assigned to them.
Sources for the Aux Buses can be Mixer output Xpts, Store Xpts or any of the sources from the
User Defined crosspoints or Fixed Crosspoints.
To Next Page
Loading...
