204
Keying and DVE Operation
Key DVE Operation
Border
This function allows the user to apply a border and effects around a Key Layer.
Border On/Off - Switches the Border On or Off
Border Fill - Selects source for the border fill from a Matte selected using the Matte Selector
parameters, Util 1 or Util 2
Border Width - Adjusts the overall width of the border
Softness - Softens the outside edges of the border
The Matte Selector and Hue, Luma and Sat parameters are used to adjust the color of the
border around a Key Layer when the option is selected in the Border Fill parameter. The user is
able to select one of 16 preset Mattes, or create a user-defined color for the border using the
Hue, Luma and Sat parameters.
Matte Selector - Selects the preset Mattes 1 to 16 or a Local Matte that allows the user to
create a their own border color.
Matte Hue, Luma and Sat - These parameters allow the user to adjusts the Hue, Luma and
Saturation levels of the Local Matte. The user is able to create their own unique border color
around a Key Layer.
Original Key Layer
Border Applied
Changed Border Fill
Border Width Adjusted
To Next Page
Loading...
