216
Mixer and Transitions
Transition Parameters
When scrolling through the wipe patterns, notice the wipe pattern adjustment indicator box at
the bottom of the wipe menu. When a wipe is selected this box will display parameters that
denote how the wipe can be adjusted. Touch this box and a set of adjustment parameters will
appear on the right of the menu. These are X,Y Position, Rotation and Aspect Ratio, depending
on the wipe selected.
Transition Parameters
When the {Transition} button is touched the initial default Transition menu appears with the
main Transition Time and Profile parameters active, this will allow you to make basic
adjustments to a background or Key transition.
Wipe Parameters
This will describe the initial default transition menu functions and parameters.
Transition Time - This sets the time that it takes for a transition to take place. The user can
control the transition time by touching the {Popup} button in the Transition Time parameter
and key in the time using the on-screen number pad. Once the transition time is set, press the
[TAKE NEXT] button on the control surface and the transition will take place to the set time.
Profile - This parameter control will adjust the curve profile in the display box under the Main
heading. Adjusting the curve profile will make the transition speed up or slowdown at a
specific time in the transition period.
X/Y Position
Rotation
Parameters
Aspect Ratio
Note: Transition Time, Profile and Shape parameter are the Grass Valleye for
Wipe, Mix and Matte Mix menus.
To Next Page
Loading...
