222
Mixer and Transitions
Advanced Wipes
Mix
This allows a Background or a Key source to mix during a transition.
Matte Mix
Matte Mix Profile - The Matte Mix Profile is where the output passes through the Matte mix
color between the two transition sources. This will cause the transition to go from the first
source through a selected matte color to the second source.
Fill Level - This is the amount of Matte added to the mix. 100% is the full amount of Matte
added.
Bias - This adjust the point that the Matte is introduced into the transition i.e. more Matte at the
start of the transition and less at the end of the transition, or the other way around.
Width - This will override the bias parameter and introduce a full Matt throughout the
transition at 100%.
To Next Page
Loading...
