311
Masterpiece
User Manual
Importing
Importing Files into the Masterpiece is a similar process to exporting as explained on the
previous pages. The import process is done via one menu. The example below describes
importing Stills.
Press the {Import/Export...} button and then in the Import button area, press the
{Stills/Audio...} button.
Use the Removable Device parameter to select the memory device containing the stills or
clips and press the {Select Device} button. The contents of the memory device will be
displayed in the gray area, left hand side of the menu. Use the Destination File parameters to
select where the files will be imported to.
Using the Selector parameter and {Open/Close} button, navigate to the files that are going to
be imported. Again use the Selector parameter and the {Select} button to select the required
files and then press {Import...}.
The files will now be imported to the selected File destination ready to use.
Going back into the filing system main menu, the imported files can be found in the {Stills...}
menu as shown below.
In this menu a new name can be given to a selected file using the on-screen keyboard.Use
To Next Page
Loading...
