299
Masterpiece
User Manual
Aux Override
Aux Override is a mechanism that allows a GPI to override the crosspoint on an Aux Bus. When
enabled, a GPI can override the Aux Bus crosspoint for the duration of the GPI being active, this
for example allows a camera joystick or similar device to override the crosspoint on an Aux Bus.
Once the GPI is released, the aux bus will return to its previously selected crosspoint.
The Aux Override menu allows you to set up override enable, GPI active state, Aux Bus and
crosspoint for each available GPI on the Masterpiece system. Overrides can be set up for both
external and internal GPIs.
To Next Page
Loading...
