359
Masterpiece
User Manual
Peripherals - Others
VDCP Control
VDCP is a common protocol for video servers. Note that only some commands (which means
also functions) are mandatory; many are optional. If optional commands are not implemented
in the disk server, VDCP Simple should be selected instead.
A video server is a system that has hard disk storage for video, and one or more audio/video
channel connected to it. A channel on a server can play or record or both. The number of
channels on the server, and what capabilities they have, are server dependent.
Playout
Press the {VDCP Control…} menu link button, this option is used to control video disk servers.
Enter the Playout.
Parameter Controls
Slot - selects the slot that was setup in the Protocols menu
New Channel - selects a channel on the server
Select File - selects a clip by name
Edit
In Point - displays the play out start position of the selected clip
Out Point - displays play out end position of the selected clip
Play Rate - will allow the user to speed up or slow down a clip and change the direction of play
{Mark In Point} - used to set a play out start point within a clip
{Mark Out Point} - used to set a play out end point within a clip
{NDF} - Non-Drop-Frame format
{DF} - Drop-Frame format
To Next Page
Loading...
