GRASS VALLEY MASTERPIECE - Peripherals - Rollcall Set Param; User Definable

356
Peripherals
Peripherals - RollCall Set Param
Peripherals - RollCall Set Param
The RollCall Set Param menus are to send a set parameter message over the RollCall network.
Masterpiece is the RollCall Client. The parameter can be a value, a string or both. You can
construct a general purpose message using the “User Definable” menu, or a specific message
such as “MV800 Layout” or “Set Crosspoint” message.
User Definable
Set the Unit ID, you must specify the ID that you are trying to talk to. This is a unique ID which
every unit has.
The RollCall Set Param menus are for sending a message to any unit on the RollCall network.
The message can be a general purpose one, which consists of a command and a parameter.
The parameter can be a value, a string or both.