GRASS VALLEY MASTERPIECE - Moving the Two Tiles so that both Can be Seen

208
Keying and DVE Operation
Dual Tile
Border Fill - Selects source for the border fill from a Matte selected using the Matte Selector
parameters, Util 1/Util 2.
Border Width - Adjusts the overall width of the border
Softness - Softens the outside edges of the border
The Matte Selector and Hue, Luma and Sat parameters are used to adjust the color of the
border around a Key Layer when the option is selected in the Border Fill parameter. The user is
able to select one of 16 preset Mattes, or create a user-defined color for the border using the
Hue, Luma and Sat parameters.
Matte Selector - Selects the preset Mattes 1 to 16 or a Local Matte that allows the user to
create a their own border color.
Matte Hue, Luma and Sat - These parameters allow the user to adjust the Hue, Luma and
Saturation levels of the Local Matte, the user is able to create their own unique border color
around a Key Layer.
Moving the two tiles so that both can be seen
The two tiles are controlled using the Tile Position & Size parameters. Using the XY parameters
for Tile 1, the tile will move as expected and move away from Tile 2.
Tile Two
Tile One
Note: If you use the “Main” Position & Size; XY or Zoom parameters, both of
the tiles will move together.