GRASS VALLEY MASTERPIECE - UHD Input Setup

188
UHD Setup and Operation
UHD Initial Setup
UHD Input Setup
Touch the {Input Setup...} button, in this menu the user will setup all the UHD inputs to the
mainframe.
As stated at the start of this chapter, in UHD mode, there will be 4x inputs for every UHD source
input to the mainframe, which consist of Input 1 (top left), Input 2 (top right), Input 3 (bottom
left) and Input 4 (bottom right). Select Input 1, then touch the “UHD Input” {Yes} button.
Notice that Inputs 1 to 4 are now ganged together as Input 1 (shown below).
The next input to select is Input 5, then touch the “UHD Input” {Yes} button, then inputs 5 to 8
are ganged together. This can be repeated up to another 8 times, allowing ten UHD sources
input to the mainframe.