GRASS VALLEY MASTERPIECE User Manual

166
Engineering, User & Panel Configuration
Panel Colors
The Other Colors menu allows the user to select and change the preset colors in the Color list.
Touch one of the colors and then use the Hue and Saturation parameters to adjust to the
desired color, then press the {Apply} button.
By Standard Colors
This menu allows the you to set crosspoint button color for the video standard for the source
assigned to that crosspoint. So that the crosspoint buttons will display different color schemes
for video standards on the control surface.
You can keep the default color scheme for the video standards or touch one of the colors to
select it and then use the Hue and Sat parameters to alter the color.
When done, touch the {Crosspoints} button and then touch and select a crosspoint in the
table that you want to set a video standard color to.
Then set the “Color By Std” parameter (shown above) to “Yes”. An asterisk “*” is displayed next
to the lamp color name in the “Xpt Lamp Color” column.

GRASS VALLEY MASTERPIECE Specifications

General

Brand	GRASS VALLEY
Model	MASTERPIECE
Category	Switch
Language	English