109
Masterpiece
User Manual
Output Setup
This menu is where each BNC output from the Masterpiece mainframe is setup, within these
menus the user is able to:
• Setup 12G-SDI operation
• Name and give a Description to each BNC output
• Setup ISO Tally’s for each BNC output
The default setting for all outputs is as an Aux output, this can be user-defined by the ability to
change any of the outputs.
Note: The menu below displays features for a system setup in HD mode.
This menu will have more options when the system is setup in UHD mode.
(set in the logged out Mainframe Config menu)
To Next Page
Loading...
