GRASS VALLEY MASTERPIECE - UHD Engineering Config Setup

187
Masterpiece
User Manual
UHD Engineering Config Setup
In the Engineering Config main menu, touch the {System Standard...} button to enter the
System Standard menu.
The System Standard menu can be set to “UHD Mode - Quadrant” or “UHD Mode - 2SI”,
however the user can choose between the UHD standards by touching the “Popup” button top
right to reveal a “New Standard” dialog box. From the dialog box the user can select what type
of UHD standard the system is set to, as shown below.
Select between UHD-Q or UHD-2SI, the frequency and the type of UHD required - UHD
Segmented Frame or UHD Slow, then press the {Apply Standard} button.
The next thing to do is to setup the Inputs and Outputs.