265
Masterpiece
User Manual
GPI Assignment
This function allows an external device to control a saved macro. The GPI parameter control
selects the GPI pin that the external device is connected to. The selected GPI pin and attached
macro are displayed in a table in the GPI Assignment area.
To attach a macro to a GPI pin, select the macro in the macro file table, and then use the GPI
parameter to select the required GPI. Once the correct GPI pin has been selected, press the
{GPI Attach} button to attach the external device to the macro. The table next to the
Attach/Detach buttons displays the GPI pin and the attached macro.
To Detach a macro from a GPI, select the GPI/Macro in the table and then press the {GPI
Detach} button. This will detach the GPI pin from the external device.
To Next Page
Loading...
