157
Masterpiece
User Manual
Button Maps
Buttons on the Crosspoint Bus can have any source assigned to them using a Button Map. This
can be done by saving and loading Button Map Files, or by creating Custom maps.
Button Maps Main Menu
The main menu allows you to load a button map file from the “Button Maps Files” table,
directly into the Mixer.
To load an existing Button Map onto the Mixer, firstly select the required file in the Button Map
Files table. That file is then loaded into the Mixer by touching the {Load} button.
The {Load} button turns green and the file is displayed in the “Map To Use” column (as shown
below).
To Next Page
Loading...
