58
How to Save
Switcher States
This is done by pressing the {Overwrite} button. The date and time that the Switcher State was
saved (overwritten) is displayed in the list. By touching the boxed area next to the time and
date, a name can be given to the Switcher State using an on-screen keyboard. Touch {Load}
button to load the saved Switcher State.
When overwriting an already saved switcher state, a dialog box will be displayed, touch “OK” to
proceed. Caution! - If you press the {Clear File} button, the switcher state will be erased.
Rolling Switcher States
Rolling Switcher States is the method of quickly saving the overall state of the system. This
allows the user to save up to 100 Switcher States in to a “Rolling List” of saved states, which
will keep rolling over after 100 states have been saved. The “Rolling Switcher State” function
is different to the Switcher State Overwrite mentioned above, because when the user touches
the “Load” button, the menu will change to display a list of saved states and the option to
enable/disable Stores, Panel, User and Eng Configs and DMEM functions when loading a saved
state. You can also set any one of the switcher states as the default startup state.
Each time the {Save} button is pressed a switcher state is saved into the rolling list.
To Next Page
Loading...
