223
Masterpiece
User Manual
Fill - This function selects the type of source that will be used as a Matte. The options range
from Matte, Util Bus 1 and 2. The Util Bus Fill is setup in the Util Bus menu. Touch the {Util/Misc}
button on the GUI to see which crosspoint the Util Bus's are set to reference.
Matte Selector - Select the required Matte from the options Local Matte or MAT 1 to MAT 16.
Hue, Luma and Saturation will only affect the Local Matte setting.
Matte Hue - sets the actual Matte color, the rotary control operates a 360 degree color wheel
where:
0 = Red
60 = Magenta
120 = Blue
180 = Cyan
240 = Green
300 = Yellow
Matte Luma - The Luminance or brightness control affects the selected Matte Hue, the
parameter adjusts from 0 to 100% where 0% is no luminance or Black and 100% is maximum
brightness.
Matte Sat - The saturation control affects the selected Matte Hue, the parameter adjusts from 0
to 100% where 0% is no saturation or no color i.e. only shades of Gray and 100% is fully
saturated or maximum color.
To Next Page
Loading...
