352
Peripherals
Peripherals - Editor Control
The Map ME parameter allows the user to offset the Mixer with the Editor, so for example the
“PP” (Program/Preview) can be set to the Mixer.
Crosspoints can be selected to the following buses for each Mixer in the User Config -
Crosspoint Mapping menu.
•BKGD A
•BKGD B
•KEY 1 FILL
•KEY 1 KEY
•KEY 2 FILL
•KEY 2 KEY
Crosspoint selection for Auxes
Crosspoints can be selected to be used with the Aux buses.
Transition Control
The following can be included in a transition:
• Transition mode - can include background, Key1, Key2, Key3 and Key4 in the transition
• Transition Types - includes MIX, WIPE and MATTE MIX
• Auto Transition Start
• Transition rate
• Transition Preview
• Transition Key On/Off
To Next Page
Loading...
