iPECS UCP600 - Page 157

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
143
Table 4.4.5.1-1 SYSTEM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Conference room
expansion
If this option is set to ON, conference room no is increased.
 OFF: Conference room 1~9
 ON: Conference room 1-100(eMG80/100),
Conference room 1-200(eMG800,UCP)
OFF
ON
OFF
SLT conference
hook switch time
It is used to make a conference call on SLT.
The user has to make the hook flash two times within this time.
2 – 9
AUS, NZ: 3
Others: 2
IP DECT
Message Server
Port
This port is used to send/receive a message with IP-DECT.
The setting must be changed in IP-DECT Base.
0,
1024-
65535
0(Unused)
XSI Service Port
This port is used to search directory through Broadsoft
XSI(Extended service interface) protocol
The setting must be changed in IP-DECT Base.
0,
1024-
65535
0(Unused,
Web
Reload)
ICM Hold
Preference
Depression of the [Hold] button during ICM call places the call
on the preferred hold, System or Exclusive.
System/
Exclusive
Exclusive
Max 100 Icon In
IP Attendant
Maximum 100 devices could be shown in a monitoring window if
it is ON.
If it is OFF, then all devices could be shown in monitoring
windows.
OFF
ON
OFF
Speed List as
Directory
[DIR] search is working when the user press [SPEED] twice or
[SPEED] and {LIST}
OFF
ON
OFF
DTMF across the
Page - Usage
This is for the Telephone event of DTMF sending and ACK
functionality during a Page.
DTMF functionality flow :
 A Page caller can send DTMF to Paged endpoints.
 A Paged endpoint can send DTMF ACK to the Page caller.
The Page is stopped, and a confirmation tone or announcement
is played to the Page caller.
Disable
Enable
Disable
DTMF across the
Page - DTMF
ACK codes
DTMF ACK digit codes programmed for comparison.
[empty], 0-
9, *, #
[empty]
DTMF across the
Page - DTMF
ACK functionality
Select the following action after receiving of DTMF ACK digit
string.
No action
Disconnect Page followed by Confirm Tone
Disconnect Page followed by Announcement
Refer to
description
No action
DTMF across the
Page - DTMF
following
Announcement
DVU Announcement number that is used for DTMF ACK
following action.
[empty], 1-
200
[empty]
Centralized
multicast RTP
relay
Centralized VSF MOH(vUVM) is relayed by vVOIM/T in vUCP if
it is ON
OFF
ON
OFF