iPECS UCP600 - Page 159

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
145
Table 4.4.5.1-1 SYSTEM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
SMDR Mail Send
Daily Set
Sets time-of-day for SMDR data to be sent on a daily basis (00
for no daily records, 01-23 for hour of the day).
00-23
SMDR Mail Auto
Send Set
If the SMDR buffer is full, the system can automatically send a
notification by E-mail.
OFF
ON
OFF
SMDR Mail Auto
Delete Set
Delete SMDR records after sending an E-mail.
OFF
ON
OFF
SMDR Receiver
Mail Address
E-mail address to receive the ACD E-mail reports.
Max.64char
acters
ACD Attributes
[Send Mail] button is used for sending the mail after filling out the below menu
ACD Mail Send
Weekly Set
Sets day of the week to send ACD statistic data weekly.
NA,
Monday to
Sunday
N/A
ACD Mail Send
Daily Set
Sets time-of-day for ACD statistic data to be sent on a daily
basis (00 for no daily records, 01-23 for hour of the day).
00-23
N/A
ACD Database
Delete After Mail
Send
Delete ACD statistic data after sending E-mail
OFF
ON
OFF
ACD Receiver
Mail Address
E-mail address to receive the ACD E-mail reports.
Max.64char
acters
Alarm Attributes
[Send Mail] button is used for sending the mail after filling out the below menu
Alarm Receiver
E-Mail
Address(To) &
Notification
Receiver E-Mail
Address(To)
The system will send an email to the saved E-Mail Address
when a system alarm occurs or the system restarts, and UCP
System sends the information by email when changing to ACT
mode during Redundancy.
Max.64char
acters
LDAP Server Settings
Server Display
Name
When the UCS Client requires access to an LDAP server, the
system will provide the LDAP server information to the client.
The server name is defined in this field.
15
characters
LDAP
Server
Server IP
When an LDAP server is employed, the IP address of the server
must be defined.
0.0.0.0
Server Port
When an LDAP server is employed, the TCP/IP port of the
server must be defined.
0001-
65535
Require Login
The UCS Client ID and Password may be required to log in to
the LDAP server.
OFF
ON
ON
Use SSL
The client can employ SSL (Secure Sockets Layer) when
supported by the server for added security.
OFF
ON
OFF