iPECS UCP600 - Page 534

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
93
4.3.3.2 Station Attributes I to III -PGM 111-113
Station Attributes define features and functions available to the station. Generally, the entry will turn the
feature ON (enable) or OFF (disable). Refer to Table 3.3.3.2-1 to Table 3.3.3.2-3 for a description of the
features and the input required.
PROCEDURE
STATION ATT 1
ENTER STA RANGE
Press the [PGM] button and dial:
- 111 for Station Attributes I
- 112 for Station Attributes II
- 113 for Station Attributes III
100-110 STATION ATT 1
PRESS FLEX_KEY (01-24)
Use the dial-pad to enter a station range (Ex. 100~110). For a single station,
enter the same number twice.
Press the desired Flex button;
Refer to Table 3.3.3.2-1 to Table 3.3.3.2-3.
Use the dial-pad to enter desired data for the attribute setting. Refer to Table
3.3.3.2-1 to Table 3.3.3.2-3.
Press the [Save] button to store the data entry.
Table 3.3.3.2-1 STATION ATTRIBUTES I (PGM 111)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
100-110 AUTO SPKR
(1:ON/0:OFF) : ON
Enables [SPEAKER] activation when a
CO/IP, DSS, or other feature button is
pressed. No need to lift the handset.
0: OFF
1: ON
ON
2
100-110 CALL FWD
(1:ON/0:OFF) : OFF
Enables the Call Forward activation by the
station.
0: OFF
1: ON
OFF
3
100-110 DND
(0-3) : 0(OFF)
Enables the DND activation by the station.
0: OFF, 1: ALL, 2:ICM call only
3:CO call only
Refer to
description
OFF
4
100-110 DATA SECURITY
(1:ON/0:OFF) : OFF
Disables to override and camp-on tones to
the station when busy.
0: OFF
1: ON
OFF
5
100-110 HOWLING TONE
(1:ON/0:OFF) : ON
Permits Howler tone to be sent to an SLT
when left off-hook.
0: OFF
1: ON
ON
6
100-110 NO TCH ANS
(1:ON/0:OFF) : OFF
Enables No-touch answer; this will
automatically connect transferred calls to the
station‘s speakerphone.
0: OFF
1: ON
OFF
7
100-110 PAGE ACCESS
(1:ON/0:OFF) : OFF
Allows station to access paging.
0: OFF
1: ON
OFF
8
100-110 HEADSET RING
(1:S/2:H/3:BOTH) : SPKR
This item selects the device to receive
incoming ring signals, Speaker, Headset, or
Both.
1: Speaker
2: Headset
3: Both
SPKR