iPECS UCP600 - Page 538

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
97
Table 3.3.3.2-2 STATION ATTRIBUTES II (PGM 112)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
17
100-110 EZ PWD LOGIN
(1:ON/0:OFF
For ez ATD. Enables/disablesrequired Auth
code use.
0: OFF
1: ON
OFF
18
100-110 EMERGENCY CO
…..
This field defines the CO Line orGroup
employed by the system to place Emergency
Assistance calls.
CO #, CO Group #, Transit-out
Refer to
description
Any CO
19
100-110 STA ACCOUNT
(1:ON/O:OFF) : OFF
When ON, the station user must enter an
authorization code to access CO Lines.
0: OFF
1: ON
OFF
20
100-110 AUTO CALL REC
(0:OFF/1:ALL/2:CO): OFF
This field enables unconditional recording of
all calls placed/received by the station.
Recordings, in .wav format, are stored at the
UCS Client or Recording Server (IPCR or 3rd
party) defined under button 21. Station and
CO calls are recorded with ALL. Only CO
calls are recorded with CO.
0: OFF
1: ALL
2: CO
OFF
21
100-110 CALL REC DEST
……..
When Unconditional Call recording is
enabled as above, the recording UCSClient
station number is defined here.
station
22
100-110 VSF BK DEL
(1:ON/0:OFF) : OFF
UCS Client may monitor voice messages for
another station as a backup.
The UCS Client will include the message
count for the station in the Voice message
count. When enabled here, the UCS Client
may delete messages for the station.
0: OFF
1: ON
OFF
23
100-110 VSF BK STA
……..
UCS Client may monitor voice messages for
another station as a backup.
UCS Client will include the message count
for the station in the Voice message count.
This field defines theUCS Client station
number that will be used as theVMIU/VMIB
backup.
station
24
100-110 VSF BK PROM
(1:ON/0:OFF) : OFF
Enables UCSClient to backup VSF Prompts.
0: OFF
1: ON
OFF
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
100-110 ADMIN
(1:EN/0:DIS) : ENABLE
Enables station access to the System
Database.
0: Disable
1: Enable
Enable