iPECS UCP600 - Page 540

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
99
Table 3.3.3.2-3 STATION ATTRIBUTES III (PGM 113)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
12
100-110 ENBLOCK MODE
(1:ON/0:OFF ) : OFF
When On, the user-dialed digits are stored at
iPECS IP or LDP Phonesuntil explicitly sent
by the user.
When sent, all dialed digits are sent to the
system in a block. En-block mode is only
available to iPECS IP and LDP Phones with
3-Soft keys.
0: OFF
1: ON
OFF
13
100-110 MSG RETRIEVE
(1:FIFO/0:LIFO ) : LIFO
Based on this entry, messages stored in the
VSF may be retrieved in either a FIFO (first-
in-first-out) or LIFO(last-in-first-out) order.
1: FIFO
0: LIFO
LIFO
14
100-110 VMID NUMBER
100
When using an adjunct VM, the system can
translate the Mailbox number from the user’s
station number to the assigned VMID. The
system sends the station number or VMID to
the VM (in-band or SMDI) in order to identify
the appropriate Voice Mailbox.
0000-9999
Station #
15
100-110 AUTO ACD-DND
([SPD],0-9,*,#): ..
If an Agent does not answer an ACD call in
the ACD No Answer timer, the Agent enters
an Unavailable state with the Reason code
entered here. The reason code is sent in the
ACD Event message.
0: None
#, *
1 ~ 9
None
16
100-110 FWD IF OOS
(1:ON/0:OFF) : OFF
If a station is Out-of-Service and has
previously forwarded calls, the system will
forward the calls if enabled here.
0: OFF
1: ON
OFF
17
100-110 BACK LIGHT
(O:OFF/1:BUSY/2:ON): 1
The backlight of the LIP phones is assigned
to stay off, light only when the station is busy
or light constantly.
0: OFF
1: Busy
2: ON
Busy
18
100-110 VSF MailSvrIP
……………………………..
The VMIB includes notification of new
messages to the user’s e-mail. This field
displays the user’s e-mail mail server for the
notification. Use Web AdminPGM 132 to
modify this value.
IP v4
address Or
Mail server
name
19
100-110 VSF Mail Addr
…………………………..
The VMIB includes notification of new
messages to the user’s e-mail. This field
displays thee-mail address to notify when a
new message is received at the VMIB. Use
Web Admin to modify this value.
e-mail
address
20
100-110 BLOCK B-CALL
(1:ON/0:OFF) : OFF
When an SLT extension tries to transfer a
CO call to a CO line, it is blocked, and the
call is released.
0: OFF
1: ON
OFF