iPECS UCP600 - Page 546

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
105
Table 3.3.3.3-1 STATION ISDN ATTRIBUTES (PGM 114)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
12
100-110 MSN WAIT
(1:ON/0:OFF ) : OFF
When a call corresponding to a MSN
Telephone Number comes into the system,
the call is basically routed to idle stations
that have a free MSN button assigned for
the corresponding Telephone Number. And
also, the call can be routed to busy stations
in the following condition.
OFF: if a keyset is in busy status, cannot
receive incoming MSN Telephone Number
corresponding call even though it has a
free(idle) corresponding MSN LOOP Button
ON: if a keyset is in busy status, can
receive incoming MSN Telephone Number
corresponding call if it has a free(idle)
corresponding MSN LOOP Button
0: OFF
1: ON
OFF
14
100-110 DID RESTRICT
(1:ON/0:OFF ) : OFF
Enable station receive DID call.
0: OFF
1: ON
OFF
15
100-110 DISA RESTRICT
(1:ON/0:OFF ) : OFF
Enable station receive DISA call.
0: OFF
1: ON
OFF
17
100-110 MODEM ENABLE
(1:ON/0:OFF ) : OFF
It is used to set modem attributes.
0: OFF
1: ON
OFF
18
100-110 FAST XFER CLI
(1:ORI/0:TRN ) : TRN
If a user transfers a CO call with CLI to SLT
or DECT, CO CLI can be seen instead of
station number when this option is set to
ORI.
0: TRN
1: ORI
TRN
20
100-110 PICKUP BY BTN
(1:ON/0:OFF ) : ON
It is used to set pick up by flex button.
0: OFF
1: ON
ON
21
100-110 MULTI LANG
(1-6):PROMPT1 A.AMERICA
Selected language prompt is played to the
user when accessing the VMIU or VMIB.
The range is as below
1:US, 2:KOREA, 3:TURKIYE
4:RUSSIA, 5:AUTRALIA, 6:GERMANY
Refer to
description
1
22
100-110 P-MSG DND
(1:ON/0:OFF) : OFF
If it is ON, the pre-selected station doesn’t
receive the ring, and the caller hears the
DND tone.
0: OFF
1: ON
OFF