iPECS UCP600 - Page 548

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
107
Table 3.3.3.3-1 STATION ISDN ATTRIBUTES (PGM 114)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
24-11
100-110 VIDEO ON CALLING
(1:ON/0:OFF ) : OFF
Video show to called party when calling (ex.
IP Video Door Phone)
0: OFF
1: ON
OFF
24-12
100-110 E.164 CLI TO
(1:ON/0:OFF ) : OFF
Send CLI with E.164 format if it is ON.
0: OFF
1: ON
OFF
24-13
100-110 FLEX PAGE
(1-3 ) : 3 PAGE
Some newly supported stations have
physical flex buttons & also have flex button
pages.
That means a station has 8 physical flex
buttons and 3 flex button pages, then 24
flex buttons are available.
The Navigation Up/Down button is used to
scroll through the Flex buttons pages
assigned.
This feature is supported as below types.
 LIP-9030, LIP-9040
 LIP-9071
 1020i, 1030i, 1040i, 1050i, 1080i
1-3
1-4(9071,
1080i)
3 PAGE
24-14
100-110 ALIGN LCD
(0-2) : NOT ALIGN
For the iPECS LIP 9000 series and 1000i
series, character alignment for messages to
the phone can be right or left aligned by the
system or alignment controlled by the
phone (“Not Align”).
0: Not align
1: Left
2: Right
Not Align
24-15
100-110 TWOWA REC AN
00
The two-way record announcement can be
recorded to play to the station as
Announcement.
0-200
00
24-16
100-110 LDT ZONE
(001-100 ) : 001
If the LDT Zone Number of an LDT table
(LCR LDT(221)) is equal to this value, the
LDT table is available to this CO Line.
001-100
001
24-17
100-110 ECM FAX(T.38)
(1:ON/0:OFF ) : ON
ECM stands for Error Correction Mode. If
you failed to send something via Faxes,
you could send it again until it is successful.
0: OFF
1: ON
ON
24-18
100-110 DISP RESTRICT
(1:ON/0:OFF ) : OFF
When {Display Restricted Caller Number} in
CLI Attributes(113) of a station is ON,
Although the caller number is restricted in
the ISDN message, the ringing station
displays the caller number.
0: OFF
1: ON
OFF
24-19
100-110 SMALL WIN USE
(1:ON/0:OFF ) : OFF
If this option is set to ON, the small popup
is displayed on the LCD of LIP-9030/9040
and 1010i/1020i/1030i/1040i/1050i.
If it is set to OFF, the top bar is displayed
instead of a small popup.
0: OFF
1: ON
OFF