iPECS UCP600 - Page 564

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
123
Table 3.3.3.15-1 STATION VM Attributes (PGM 127)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
VM COS
(1-5) : 1
Voice Mail COS (Grade) can be set on
each station. Each COS attribute can be
set at PGM 253.
1-5
1
2
ADMINISTRATOR MAILBOX
(1:EN/0:DIS):DISABLE
If this option is set to ON, the
Administrator Voice Mail feature can be
accessed.
0: Disable
1: Enable
Disable
3
ANNC. ONLY MAILBOX
(1:EN/0: DIS): DISABLE
If this option is set to ON, no message
can be left, and only the greeting is
played.
0: Disable
1: Enable
Disable
4
ANNC. ONLY OPTION
(0-1): PREVIOUS MENU
This option is available only ANNC. ONLY
MAIL BOX is set to ON.
 Previous: after the greeting message
is played, go to the previous menu.
 Hang Up: after the greeting message
is played, the call is hanged up.
0: Previous
1: Hang Up
Previous
menu
5
COMPANY DIR FIRST NAME
…............
This field is the first name of a station for
the Company Directory feature.
Max 12
Char
N/A
6
COMPANY DIR LAST NAME
…............
This field is the last name of a station for
the Company Directory feature.
Max 12
Char
N/A
7
USER-MSG RW/FF TIME
(03-99):04 Sec
User Message Rewind / Fast Forward is
supported by this time.
03-99
04
8
NOTIFY REPEAT COUNT
(00-99) : 03
It is used to transfer a call to the attendant
if the retry count is over this for VM
notification.
00-99
03
9
NOTIFY DIAL TIME
(00-99) : 15 Sec
It is dial waiting time after provide
VMIU/VMIB announcement for VM
notification.
00-99
(seconds)
15
10
FORWARD OPTION
(0-1) : MOVE
When a left message is forwarded, this
option is applied.
0:Move
1: Copy
Move
11-15
CASCADE MAILBOX1-5
….
Message cascading is a feature that
copies messages left for the originating
mailbox to another mailbox. This field is
the destination mail box station.
Station No.
N/A
16
CASCADE METHOD
(0-2): DISABLE
Cascade method is determined.
0:Disable, 1: Copy, 2: Move
Refer to
description
Disable