iPECS UCP600 - Page 565

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
124
17
CASCADE MSG TYPE
(0-2): NORMAL ONLY
Cascade Message Type is determined.
0:Normal Only, 1: Urgent Only, 2:All
Refer to
description
Normal
only
18
CASCADE TMR(min)
(000-250): 000
Cascade Apply Timer is set.
000 ~250
(min)
0
19
MSG WAIT NOTICE
(0-2): TONE
When a user has voice mail, the system
can provide this as a voice prompt instead
of a dial tone according to the option
based on station.
Disable: The system provides a normal
dial tone when a user goes to off-hook
status.
Tone: The system provides a warning
tone instead of a dial tone to give an
indication when a user goes to off-hook
status.
0: OFF
1:Tone
2:Prompt
Tone
19
MSG WAIT NOTICE
(0-2): TONE
Prompt: The system provides message
indication as a voice prompt when a user
goes to off-hook status.
0: OFF
1:Tone
2:Prompt
Tone
20
CASCADE FOR READ MSG
(0-1): ENABLE
If this value is set to Enable, the left
message can be cascaded to the next
destination regardless the message is
read or not. If this value is set to Disable,
cascading action is stopped when the left
message is read.
0: Disable
1: Enable
Enable