iPECS UCP600 - Page 586

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
145
4.3.5.5 DISA Service – PGM 146
DISA Service can be enabled on CO lines based on the system operation mode (Day, Night, and Timed).
DISA calls may be routed to dial tone and await user dialing (simple routing) or through a multi-layered Audio
Text menu assigning a VSF Announcement/Customer Call Route (CCR) Table Index.
The system can be instructed to disconnect after the announcement or follow the CCR Table routing with a
user-recorded announcement requesting specific inputs from the user.
PROCEDURE
DISA ATTRIBUTES
ENTER COL RANGE
Press the [PGM] button and dial 146.
01-02 DISA ATTRIBUTE
F1:DAY F2:NIGHT F3:TIME
Use the dial-pad to enter the CO Line range. For a single CO Line, enter
the same number twice.
001-002 DISA ATTRIBUTE
DAY SERVICE 00 (00 – 71)
Select the desired Flex button:
- Button 1: Day
- Button 2: Night
- Button 3: Timed
Use the dial-pad to enter the desired VSF AA Announcement (00:
disabled, 01~70 CCR Table index PGM 228, or 71: await user digits).
Enter ‘#’ after the entry to include a “drop after announcement
instruction.”
Press the [Save] button to store the data entry.