iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
160
Table 3.3.6.1-1 SYSTEM ATTRIBUTES I (PGM 160)
EASY 5 WAKE UP USAGE
(1:ON/0:OFF) : OFF
If this value is set to ON, and PGM 161 –
5-Wake Up Usage is also set to ON, each
station user can enter his wake up time
without entering wake up type, wake up
the index.
WEB LOGIN ID USAGE
(1:ON/0:OFF) : OFF
If this value is set to ON, Login ID should
be entered to log in to the web admin.
VM MEX NOTIFY OVER LCO
(1:EN/0:DIS) : DISABLE
If this value is set to ON, LCO can be
used for the VM notification call to MEX.
0: DISABLE, 1: ENABLE
MODEM ASC CO LINE
(00-74) : 00
The call is delivered to the built-in modem
if calls come in from the assigned CO line.
MEET ME SOFT DISPLAY
(1:ON/0:OFF) : ON
If this value is set to OFF, {MEET ME} soft
button is not displayed in being paged.
DEV INFO REQ INTERVAL
(015-255) : 015
The system checks each device by polling
messages periodically using this timer.
NUM OF CLI WAIT LIST
(000-255) : 000
The number of CLI waitlists can be the
available number.
When an Emergency Mailbox Station is
assigned, an emergency call placed by a
station is recorded automatically to the
assigned mailbox.
MSVC XML PORT
(00001-65535) : 07878
The XML port used to support Web
callback, call-through, and iPECS
ClickCall application for MSVC (Mobile
Service) must be defined.
MEXT CO PASSWD
(1:ON/0:OFF) : OFF
When a mobile extension places an
external call using an iPECS CO/IP Line,
the user may be required to enter a valid
Authorization code to place the call.
DIAL BY NAME LIST
(0:ALL/1:GRP) : OFF
The Dial by Name feature allows stations
in any ICM tenancy group to call a station
in the ICM Tenancy group. When desired,
Dial by Name can be limited to function
within allowed Tenancy calling groups,
PGM 125.
All, Accessible ICM Group only
To Next Page
Loading...
