iPECS UCP600 - Page 628

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
187
Table 3.3.6.17-1 SMDR ATTRIBUTES (PGM 177)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
2
SMDR PRINT
(1 : ON/ 0: OFF) : ON
The system can output SMDR records
automatically as they occur (real-time) or
only when requested. When this attribute is
ON, SMDR output is automatic at call
completion.
0: OFF
1: ON
ON
3
RECORD TYPE
(1 : LD/ 0: ALL) : LD
The system can record all outgoing calls or
only long-distance calls. Long-distance
calls are identified by the LD digit count and
LD codes assigned in Flex button 4 and 19,
respectively.
0: ALL calls
1: LD
LD
4
LD CALL DIGIT COUNT
(07-15) : 07
Dialed numbers, which exceed the
assigned LD digit count, are considered
long-distance calls for SMDR and COS
purposes.
07-15
07
5
PRINT INCOMING CALL
(1 : ON/ 0: OFF) : OFF
The system can output records for
incoming calls as well as outgoing calls. If
enabled, incoming calls are recorded as
well as outgoing calls.
0: OFF
1: ON
OFF
6
PRINT LOST CALL
(1 : ON/ 0: OFF) : ON
The system can provide lost call records,
records for unanswered incoming
(abandoned) calls.
0: OFF
1: ON
ON
7
RECORD IN DETAIL
(1 : ON/ 0: OFF) : ON
The system can output detailed call records
(ON) or summary information (total number
of calls, cost, and cost for each station).
0: OFF
1: ON
ON
8
HIDDEN DIALED DIGIT
( 0 – 9 ) : 0
For security purposes, digits dialed for an
outgoing call can be hidden and replaced
with “*.” This field defines the number of
digits to hide.
Button 24 below defines whether leading or
trailing digits are hidden. In addition, the
station must be assigned for SMDR HIDE,
PGM 113 button 5.
0~9
0
9
SMDR CURRENCY UNIT
…
The unit of currency used for call cost can
be identified with 3 alpha characters for
easy reference. Refer to Table 2.1.2-1.
-
10
COST PER PULSE
000000
When the PSTN provides metering, the
cost per metering pulse can be assigned.
6 digits
000000
11
SMDR DECIMAL LOCATION
(0-5) : 0
This value determines the decimal position
in the Cost per Pulse, button 10, starting
from the rightmost digits.
0~5
0