iPECS UCP600 - Page 638

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
197
Table 3.3.6.20-2 SYSTEM TIMERS II (PGM 181)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
9
PAGE TIME OUT TMR(sec)
(000-255) : 015
Determines the maximum duration of a
page after which the caller and Page
Zone is released.
000~255
(seconds)
15
10
PAUSE TMR(sec)
(1-9) : 3
A Timed pause of this duration is used in
Speed Dial and during other automatically
dialed digits sent to the PSTN.
1~9
(seconds)
3
11
SOFT AUTO RLS TMR(sec)
(01-30) : 10
When a Soft Key is used on the iPECS
Phone, after the expiration of this timer,
the display will return to the previous
display.
1~30
(seconds)
10
12
VM PAUSE TMR(100 msec)
(01-90) : 30
When the system sends a “Pause” to
Voice Mail using In-band signals, the
Pause interval is defined by this timer.
Not available in the USA.
1~90
(100msec.)
30
13
VSF CUT ERR TMR(1 SEC)
(01-90) : 00
To cut error tone in VSF message that is
left in a station.
1~90
(1 sec.)
00
14
UNUSED
Unused.
15
EMERGENCY RETRY TMR
(00-99) : 00 SEC
The system tries to make emergency
calls according to the CO access
rule/Prefer CO/CO group if the system
could not seize a predefined emergency
Co line within this timer.
00~99
(1 sec.)
00
16
ERROR TONE TMR(1sec)
(005-180) : 030
Error Tone Timer
005~180
(1 sec.)
30
17
HOWLING TONE TMR(1sec)
(000-180) : 030
Howling Tone Timer
000~180
(1 sec.)
30
18
NOTIFY PLAY DELAY(1sec)
(01-99) : 10
When VM notification call uses LCO, the
system will treat the call as the answered
after this timer and play the new message
the prompt.
1~99
(1 sec.)
10
19
SHORT MODEM TMR(1sec)
(01-60) : 10
If {Short modem} of an SLT is ON, the
SLT maintains the modem mode for this
time.
01~60
(1 sec.)
10