iPECS UCP600 - Page 640

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
199
Table 3.3.6.20-3 SYSTEM TIMERS III (PGM 182)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
8
EN-BLOC I_DGT TMR(sec)
(01-20) : 05
When an ISDN Line is assigned to send
digits En-block, PGM 143-button 3, the
system will send a dialed digit if the user
dials “#” or this timer is expired.
01~20
(seconds)
05
9
DTMF DURATION TMR(10ms)
(04-99) : 10
This timer establishes the duration of the
DTMF tone sent on an analog CO Line.
04~99
(10 msec.)
10
10
FLEX DID TMR(100ms)
(01-99): 30
The system will receive DID digits for this
timer. After the timer expires, the system
will use the last 2 to 4 digits received as
DID digits.
01~99
(100msec.)
30
11
WAKE UP FAIL TMR (sec)
(00-99): 20
Provide wake up fail indication to
attendant according to this timer.
00~99
(1 sec.)
20
12
PREPAID WARN TMR (sec)
(00-99): 00
Prove warning tone when run out of
prepaid money if this timer is not zero.
00~99
(1 sec.)
00
13
FAX DETECT TMR (sec)
(01-20): 10
It is maximum fax tone detection time to
deliver FAX call to fax destination.
1~20
(1 sec.)
10
14
AUTO PAUSE TMR (sec)
(000-255): 000
IPCR Mute function will be released by
this auto pause released timer.
0~255
(1 sec.)
0