iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
200
4.3.6.21 In-Room Indication – PGM 183
The Supervisor Station can set the In-Room Indication to all members in the same Group up to 10 bins can be
programmed, and each bin has (at most) 20 members excluding the Supervisor.
IN ROOM INDICATION
ENTER BIN NO (01-10)
Press the [PGM] button and dial 183.
IN ROOM INDICATION
F1:SUPERVISOR F2:MEM
Use the dial-pad to enter the desired bin number.
Press the desired Flex button; refer to Table 3.3.9.6-1.
Press the [Save] button to store the data entry.
Table 3.3.6.21-1 In-Room Indication (PGM 183)
IN ROOM INDICATION
SURERVISOR : STA 100
Assigns Supervisor station.
This entry assigns stations as
members.
To Next Page
Loading...
