iPECS UCP600 - Page 643

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
202
4.3.6.23 NTP Attributes – PGM 195
The system can employ the Network Time Protocol (NTP) or ISDN clock to synchronize the system time with
the NTP time server or ISDN clock. The system requests the time from the NTP server at 10-minute intervals
and then determines the time differential. If the system time is more 2 seconds off the NTP time, the system
time is adjusted to synchronize with the NTP server time.
PROCEDURE
NTP ATTRIBUTES
PRESS FLEX KEY (1-1)
Press the [PGM] button and dial 195.
Press the Flex button for the desired NTP Attribute; refer to Table 3.3.6.23-1.
Use the dial-pad to enter the desired data. Refer to Table 3.3.6.23-1.
Press the [Save] button to store the data entry.
Table 3.3.6.23-1 NTP ATTRIBUTES
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
NETWORK TIME/DATE
(0-2): DISABLE(0)
Sets time synchronization for the system as :
 Disable
 ISDN clock
 NTP
NTP Attributes are set only via the Web.
0: DISABLE
1: ISDN
2: NTP
DISABLE