iPECS UCP600 - Page 645

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
204
4.3.6.25 VM COS Attributes – PGM 253
Each Station is assigned one of the five Voice Mail Classes of Service. The VM COS attributes include user
greeting length, E-Mail notifications, message retention, and optional message marking.
PROCEDURE
ENTER PGM NUMBER
Press the [PGM] button and dial 253.
VM COS ATTRIBUTE
ENTER COS RANGE (1-5)
Enter COS range from 1 to 5.
1-2 VM COS ATT
PRESS FLEX KEY (1-8)
Press flex button 1-8 for the desired setting. Refer to Table 3.3.6.25-1.
Use the dial-pad to enter the desired data. Refer to Table 3.3.6.25-1.
Press the [Save] button to store the data entry.
Table 3.3.6.25-1 VM COS ATTRIBUTES (PGM 253)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
GREETING LENGTH
(00-99) : 60
This defines maximum user
greeting length.
00-99
60
2
MESSAGE LENGTH
(000-600) : 000
This defines maximum user
message recording time.
000-600
000
3
NUMBER OF MESSAGE
(000-250) : 000
It defines the maximum number of
voice mail messages.
000-250
000
4
RETENTION TIME
(00-99) : 00 (DAYS)
Voice mail messages will be
automatically deleted after this
amount of days.
00-99
00
5
E-MAIL NOTIFICATION
(0-2) : NOTI. DELETE
E-mail notification can be enabled
or disabled.
0: OFF
1: Notification
2:
Notification&
Delete
Notification&
Delete
6
FUTURE DELIVERY MSG
(1 : ON /0 :OFF) : OFF
Future Delivery messages can be
enabled or disabled.
0: OFF
1: ON
OFF
7
CONFIRM MSG RECEIPT
(1:ON/0:OFF) : OFF
Confirm message receipt can be
enabled or disabled.
0: OFF
1: ON
OFF
8
PRIVATE MSG MARK
(1:ON/0:OFF) : OFF
Private message marks can be
enabled or disabled.
0: OFF
1: ON
OFF