iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
57
Table 4.4.2.2-1 Common Attributes
Users can select the desired language for Station Web.
English, Local language
If an iPECS IP or LDP Phone user attempts to page using the
speakerphone, pre-selection will be activated, and the display
shows “Lift Handset for Page when Lift Handset for Page is ON.”
If Lift Handset for Page is OFF, the User can make a page on
speakerphone without lifting the handset.
If Privacy is ON, then any person could not barge-in into the
station, and also Attendant can’t intrude on Station.
Also, if Privacy is ON, any person can’t forcefully disconnect the
station.
This option enables each station to block a collect call by setting
OFF.
This option indicates whether to use the other station by showing
the LED of the DSS button if the other station is assigned to the
DSS button. If this option is ON, the DSS LED light appears red.
The LED DSS light is unavailable even though the station number
is assigned to the DSS button if this option is OFF.
DSS LED
service on
other station
This option indicates whether DSS LED is updated or not on
another station
If it is ON, then the DSS button LED of the other station is
updated. If it is OFF, then the DSS button LED of the other station
is not updated
Stop
Emergency
page
announcement
If this is set to "After the announcement," the system will keep
playing the announcement regardless of the calling party's status.
By calling party, After announcement
If it is set to the available number, the system sends LM IP to the
UC premium client even though it is connected to CM.
It is used for local survival.
UCP:1-100, eMG800:1-32,eMG80/100: 1-15
The only audio path is connected when making an internal
call/answer. Both Audio and Video path is connected when
making internal call/answer between LIP-9070/9071.
Audio only, Audio & Video
Hot Desk
Emergency
Call Identity
When a Hot desk station makes an emergency call, the
specification of the CO line seized and caller number(CLI) is used
with stations according to this option.
Follow Logged-in Agent: Use Emergency CO Group and
CLI of hot desk logical user station.
Follow Hot Desk Phone: Use Emergency CO Group and
CLI of hot desk physical phone the user logged in.